manualshive.com logo in svg

Kia Carnival 2023, Owner'S Manual, Page: 559 / 606

Share
Download
Kia Carnival 2023 Owner'S Manual Download Page 559

Maintenance

58

7

Light bulbs

Replacing side repeater lamp 
(LED type)

If the Side repeater lamp (LED) (1) does 
not operate, have your vehicle checked 
by a professional workshop.
Contact and visit an authorized Kia 
dealer.
The LED lamp cannot be replaced as a 
single unit because it is an integrated 
unit. The LED lamp has to be replaced 
with the unit.
A skilled technician should check or 
repair the Side repeater lamp (LED), for 
it may damage related parts of the vehi

-

cle.

Replacing side marker, stop and 
taillamp (Bulb type)

1. Turn off vehicle and disconnect the 

negative terminal from the battery.

2. Open the liftgate.
3. Open the service cover.
4. Loosen the light assembly retaining 

screws with a cross-tip screw driver.

5. Remove the rear combination lamp 

assembly from the body of the vehi

-

cle.

6. Disconnect the rear combination lamp 

connector.

7. Remove the socket from the assembly 

by turning the socket counterclock

-

wise until the tabs on the socket align 
with the slots on the assembly.

OKA4070032

OKA4070036

OKA4070037

OKA4070038

Summary of Contents for Carnival 2023































































































































































































































































































































































































































































































































































































































Reviews:

No comments