Kia Carnival 2023, Owner'S Manual, Page: 555 / 606

Maintenance
54 7
Light bulbs
CAUTION
Headlamp lens
To prevent damage, do not clean the
headlamp lens with chemical solvents or
strong detergents.
NOTICE
僅 If the light bulb or lamp connector is
removed while the lamp is still on, the
fuse box's electronic system may log
it as a malfunction. Therefore, a lamp
malfunction incident may be recorded
as a Diagnostic Trouble Code (DTC) in
the fuse box.
僅 It is normal for an operating lamp to
flicker momentarily. This is due to a
stabilization function of the vehicle's
electronic control device. If the lamp
lights up normally after momentarily
blinking, then it is functioning as nor
-
mal.
However, if the lamp continues to
flicker several times or turns off com
-
pletely, there may be an error in the
vehicle's electronic control device.
Please have the vehicle checked by
an authorized Kia dealer immediately.
NOTICE
Have the headlamp aiming adjusted by
an authorized Kia dealer after an acci
-
dent or after the headlamp assembly is
reinstalled.
NOTICE
You can find moisture inside the lens of
lamps after a car wash or driving in the
rain. It is a natural event caused by the
temperature difference between the
inside and the outside of the lamp and
does not mean there is a problem with
its functions. The moisture inside the
lamp would disappear if you drive the
vehicle with the headlamp turned on.
However, the level at which the moisture
is removed may differ depending on the
size/location/condition of the lamp. If the
moisture continues to stay inside the
lamp, have the vehicle checked by an
authorized Kia dealer.
If you don't have the necessary tools, the
correct bulbs and the expertise, consult
an authorized Kia dealer. In many cases,
it is difficult to replace vehicle light bulbs
because other parts of the vehicle must
be removed before you can get to the
bulb. This is especially true if you have to
remove the headlamp assembly to get
to the bulb(s).
Removing/installing the headlamp
assembly can result in damage to the
vehicle. If non-genuine parts or substan
-
dard bulbs are used, it may lead to blow
-
ing a fuse or other wiring damages.
Do not install extra lamps or LEDs to the
vehicle. If additional lights are installed, it
may lead to lamp malfunctions and flick
-
ering. Additionally, the fuse box and
other wiring may be damaged.
Light bulb position (Front)
Head lamp – Type A
OKA4070024N