manualshive.com logo in svg

Kia Carnival 2023, Owner'S Manual, Page: 523 / 606

Share
Download
Kia Carnival 2023 Owner'S Manual Download Page 523

Maintenance

22

7

Air cleaner

Air cleaner

Filter replacement

Air cleaner filter must be replaced when 
necessary, and should not be washed.

You can clean the filter when inspecting 
the air cleaner compartment. Clean the 
filter by using compressed air.
1. Pull up the lever (1) on the air cleaner 

cover and release the lock.

2. Pull up the air cleaner cover (2) and 

open.

3. Rotate the fixed lever on the filter and 

loosen the lock.

4. Replace the air cleaner filter.
5. Assemble in reverse order.
Replace the filter according to the Main

-

tenance Schedule.
If the vehicle is operated in extremely 
dusty or sandy areas, replace the ele

-

ment more often than the usual recom

-

mended intervals. (Refer to 
"Maintenance under severe usage con

-

ditions" on page 7-12.)

CAUTION

僅 Do not drive with the air cleaner 

removed; this will result in excessive 
engine wear.

僅 When removing the air cleaner filter, 

be careful that dust or dirt does not 

OMQ4070009

OMQ4070014

OMQ4070015

OMQ4070016

Summary of Contents for Carnival 2023































































































































































































































































































































































































































































































































































































































Reviews:

No comments