manualshive.com logo in svg

Kia Carnival 2023, Owner'S Manual, Page: 495 / 606

Share
Download
Kia Carnival 2023 Owner'S Manual Download Page 495

What to do in an emergency

20

6

If you have a flat tire (with spare tire)

Jack label

Type A

Type B

Type C

* The actual Jack label in the vehicle may differ from the illustration. For more 

detailed specifications, refer to the label attached to the jack.

1. Model Name
2. Maximum allowable load
3. When using the jack, set your parking brake.
4. When using the jack, stop the engine.
5. Do not get under a vehicle that is supported by a jack.
6. The designated locations under the frame
7. When supporting the vehicle, the base plate of jack must be vertical under the lift

-

ing point.

8. Move the shift position to the P (Park) position on vehicles.
9. The jack should be used on firm level ground.
10.Jack manufacturer
11.Production date
12.Representative company and address

OHYK060001

OHYK060005

OHYK064002

Summary of Contents for Carnival 2023































































































































































































































































































































































































































































































































































































































Reviews:

No comments