manualshive.com logo in svg

Kia Carnival 2023, Owner'S Manual, Page: 486 / 606

Share
Download
Kia Carnival 2023 Owner'S Manual Download Page 486

11

6

6

What to do in an emergency

If you have a flat tire (with spare tire)

external factors such as nails or road 
debris.

僅 If you feel any vehicle instability, 

immediately take your foot off the 
accelerator, apply the brakes gradu

-

ally and with light force, and slowly 
move to a safe position off the road.

NOTICE

Protecting TPMS

Tampering with, modifying, or disabling 
the Tire Pressure Monitoring System 
(TPMS) components may interfere with 
the system's ability to warn the driver of 
low tire pressure conditions and/or 
TPMS malfunctions. Tampering with, 
modifying, or disabling the Tire Pressure 
Monitoring System (TPMS) components 
may void the warranty for that portion of 
the vehicle.

This device complies with Part 15 
of the FCC rules.

Operation is subject to the following 
three conditions:
1. This device may not cause harmful 

interference, and

2. This device must accept any interfer

-

ence received, including interference 
that may cause undesired operation.

3. Changes or modifications not 

expressly approved by the party 
responsible for compliance could void 
the user's authority to operate the 
device.

If you have a flat tire (with 
spare tire)

If you have a flat tire, you can change 
the flat tire to a spare tire using tools.

WARNING

Driving on a flat tire will cause perma

-

nent damage to the tire. Re-inflating a 
tire after it has been driven on while 
severely underinflated or flat may cause 
a blowout and a serious crash. Never 
attempt to re-inflate a tire that has been 
driven on while severely underinflated or 
flat. In this case, repair or replace the flat 
tire as soon as possible.

WARNING

Changing a tire can be dangerous. Fol

-

low the instructions in this section when 
changing a tire to reduce the risk of seri

-

ous injury or death.

CAUTION

Be careful as you use the jack handle to 
stay clear of the flat end. The flat end 
has sharp edges that could cause cuts.

Jack and tools

The jack and wheel lug nut wrench are 
stored in the luggage compartment.

OKA4060034N

Summary of Contents for Carnival 2023































































































































































































































































































































































































































































































































































































































Reviews:

No comments