manualshive.com logo in svg

Kia Carnival 2023, Owner'S Manual, Page: 471 / 606

Share
Download
Kia Carnival 2023 Owner'S Manual Download Page 471

Driving your vehicle

196

5

Vehicle load limit

includes the curb weight of the vehicle, 
any cargo you may carry in it, and the 
people who will be riding in the vehicle. 
And if you tow a trailer, you must add 
the tongue load to the GVW because 
your vehicle will also be carrying that 
weight.
The trailer tongue should weigh a maxi

-

mum of 10 % of the total loaded trailer 
weight, within the limits of the maximum 
trailer tongue load permissible.
After you've loaded your trailer, weigh 
the trailer and then the tongue, sepa

-

rately, to see if the weights are proper. If 
they aren't, you may be able to correct 
them simply by moving some items 
around in the trailer.

WARNING

Trailer

僅 Never load a trailer with more weight 

in the rear than in the front. The front 
should be loaded with approximately 
60% of the total trailer load; the rear 
should be loaded with approximately 
40% of the total trailer load.

僅 Never exceed the maximum weight 

limits of the trailer or trailer towing 
equipment. Improper loading can 
result in damage to your vehicle and/
or personal injury. Check weights and 
loading at a commercial scale or high

-

way patrol office equipped with 
scales.

僅 An improperly loaded trailer can 

cause loss of vehicle control.

Vehicle load limit

The vehicle load limit is displayed on the 
tire and loading information label on the 
driver's door.

Tire and loading information 
label

The label located on the driver's door sill 
gives the original tire size, cold tire pres

-

sures recommended for your vehicle, 
the number of people that can be in 
your vehicle and vehicle capacity weight.

Example for spare tire

Vehicle capacity weight:

僅 7 seats: 1,157 lbs. (525 kg)
僅 8 seats: 1,323 lbs. (600 kg)
Vehicle capacity weight is the maximum 
combined weight of occupants and 
cargo. If your vehicle is equipped with a 
trailer, the combined weight includes the 
tongue load.

Seating capacity:

Total: 7/8 persons (Front seat: 2 persons, 
Rear seat: 5/6 persons)
Seating capacity is the maximum num

-

ber of occupants including a driver, your 
vehicle may carry.

OKA4050526N

Summary of Contents for Carnival 2023































































































































































































































































































































































































































































































































































































































Reviews:

No comments