manualshive.com logo in svg

Kia Carnival 2023, Owner'S Manual, Page: 45 / 606

Share
Download
Kia Carnival 2023 Owner'S Manual Download Page 45

Safety features of your vehicle

24

3

Seat

Forward and backward adjust

-

ment (VIP Lounge Seat)

To move the seat forward or backward:
1. Pull the seat slide adjustment lever up 

and hold it.

2. Slide the seat to the position you 

desire.

3. Release the lever and make sure the 

seat is locked in place.

Adjust the seat before driving, and make 
sure the seat is locked securely by trying 
to move forward and backward without 
using the lever. If the seat moves, it is 
not locked properly.

Left and right adjustment (VIP 
Lounge Seat)

To move the seat left side or right side:

1. Pull the seat slide adjustment lever up 

and hold it.

2. Slide the seat to the position you 

desire.

3. Release the lever and make sure the 

seat is locked in place.

Adjust the seat before driving, and make 
sure the seat is locked securely by trying 
to move left side and right side without 
using the lever. If the seat moves, it is 
not locked properly.

Seat cushion height adjustment 
(VIP Lounge Seat)

To change the height of the seat cush

-

ion:
1. Push the lever upwards or down

-

wards to adjust the seat cushion 
height.

2. Release the switch once the seat 

reaches the desired position.

OKA4030035

OKA4030036

OKA4030162L

Summary of Contents for Carnival 2023































































































































































































































































































































































































































































































































































































































Reviews:

No comments