manualshive.com logo in svg

Kia Carnival 2023, Owner'S Manual, Page: 435 / 606

Share
Download
Kia Carnival 2023 Owner'S Manual Download Page 435

Driving your vehicle

160

5

Reverse Parking Collision-Avoidance Assist (PCA)

Reverse Parking Collision-Avoidance 
Assist.
If you change the warning volume, the 
Warning Volume of other Driver Assis

-

tance systems may change.

Reverse Parking Collision-Avoid

-

ance Assist operation

Operating conditions

If 'Rear Active Assist' or 'Rear Warning 
Only' is set from the Settings menu, 
Reverse Parking Collision-Avoidance 
Assist will be in the ready status when 
the following conditions are satisfied:
僅 The liftgate is closed
僅 The gear is shifted to R (Reverse)
僅 Vehicle speed is below 6 mph (10 km/

h)

僅 Function components such as the 

wide-rear view camera and the rear 
ultrasonic sensors are in normal con

-

ditions

When Reverse Parking Collision- Avoid

-

ance Assist activates, a line appears 
behind the vehicle image in the instru

-

ment cluster.
Reverse Parking Collision-Avoidance 
Assist operates only once after the gear 
is shifted to R (Reverse). To reactivate 
Reverse Parking Collision-Avoidance 
Assist, shift the gear from another gear 
to R (Reverse).

Rear Active Assist

僅 If the function detects a risk of colli

-

sion with a pedestrian or an object, 
the function will warn the driver with 
an audible warning and warning mes

-

sage on the cluster. When Rear View 
Monitor is operating, a warning will 
appear on the infotainment system 
screen.

僅 If the function detects imminent colli

-

sion with a pedestrian or an object 
behind the vehicle, the function will 
assist you with braking. The driver 
needs to pay attention as the brake 
assist will end within 2 seconds. The 
driver must immediately depress the 
brake pedal and check vehicle sur

-

roundings.

僅 Brake control will end when:

- The gear is shifted to P (Park) or D 

(Drive).

- The driver depresses the brake 

pedal with sufficient power

- Braking assist last for approxi

-

mately 2 seconds

- If brake assist has last for approxi

-

mately 5 minutes, EPB (Electronic 
Parking Brake) is engaged and at 
the same time braking assist will be 
released.

僅 The warning will turn off when:

OKA4050535N

Summary of Contents for Carnival 2023































































































































































































































































































































































































































































































































































































































Reviews:

No comments