Kia Carnival 2023 Owner'S Manual Download Page 387

Page: 387 / 606

Driving your vehicle

112

Smart Cruise Control (SCC)

WARNING

In the following situations, Smart Cruise
Control may not warn the driver of a col

lision.
僅 The distance from the front vehicle is

near, or the vehicle speed of the front
vehicle is faster or similar with your
vehicle

僅 The speed of the front vehicle is very

slow or is at a standstill

僅 The accelerator pedal is depressed

right after Smart Cruise Control is
turned on

WARNING

Take the following precautions when
using Smart Cruise Control:
僅 Smart Cruise Control does not substi

tute for proper and safe driving. It is
the responsibility of the driver to
always check the speed and distance
to the vehicle ahead.

僅 Smart Cruise Control may not recog

nize unexpected and sudden situa

tions or complex driving situations, so
always pay attention to driving condi

tions and control your vehicle speed.

僅 Keep Smart Cruise Control off when

the function is not in use to avoid
inadvertently setting a speed.

僅 Do not open the door or leave the

vehicle when Smart Cruise Control is
operating, even if the vehicle is
stopped.

僅 Always be aware of the selected

speed and vehicle to vehicle distance.

僅 Keep a safe distance according to

road conditions and vehicle speed. If
the vehicle to vehicle distance is too
close during high-speed driving, a
serious collision may result.

僅 When maintaining distance with the

vehicle ahead, if the front vehicle dis

appears, the function may suddenly
accelerate to the set speed. Always be
aware of unexpected and sudden sit

uations from occurring.

僅 Vehicle speed may decrease on an

upward slope and increase on a
downward slope.

僅 Always be aware of situations such as

when a vehicle cuts in suddenly.

僅 When you are towing a trailer or

another vehicle, we recommend that
Smart Cruise Control is turned off due
to safety reasons.

僅 Turn off Smart Cruise Control when

your vehicle is being towed.

僅 Smart Cruise Control may not operate

normally if interfered by strong elec

tromagnetic waves.

僅 Smart Cruise Control may not detect

an obstacle in front and lead to a colli

sion. Always look ahead cautiously to
prevent unexpected and sudden situ

ations from occurring.

僅 Vehicles moving in front of you with a

frequent lane change may cause a
delay in the function's reaction or may
cause the function to react to a vehi

cle actually in an adjacent lane.
Always drive cautiously to prevent
unexpected and sudden situations
from occurring.

僅 Always be aware of the surroundings

and drive safely, even though a warn

ing message does not appear or an
audible warning does not sound.

僅 If any other function's warning mes

sage is displayed or warning sound is
generated, Smart Cruise Control
warning message may not be dis

played and warning sound may not
be generated.

Summary of Contents for Carnival 2023































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Carnival 2023

Reviews:

Kia Carnival 2023, Owner'S Manual, Page: 387 / 606

Search results

Summary of Contents for Carnival 2023

Reviews: