manualshive.com logo in svg

Kia Carnival 2023, Owner'S Manual, Page: 383 / 606

Share
Download
Kia Carnival 2023 Owner'S Manual Download Page 383

Driving your vehicle

108

5

Smart Cruise Control (SCC)

Smart Cruise Control operation

Operating conditions

Smart Cruise Control will operate when 
the following conditions are satisfied.

Basic function

僅 The gear is in D (Drive)
僅 The driver's door is closed
僅 EPB (Electronic Parking Brake) is not 

applied

僅 Your vehicle speed is within the oper

-

ating speed range
- 5 ~ 110 mph (10 ~ 180 km/h): when 

there is no vehicle in front

- 0 ~ 110 mph (0 ~ 180 km/h): when 

there is a vehicle in front

僅 ESC (Electronic Stability Control), TCS 

(Traction Control System) or ABS is on

僅 ESC (Electronic Stability Control), TCS 

(Traction Control System) or ABS is 
on, but not controlling the vehicle

僅 Engine RPM is not in the red zone
僅 Forward Collision-Avoidance Assist 

brake control is not operating

NOTICE

When stopped behind another vehicle, 
the driver can turn on Smart Cruise Con

-

trol while the brake pedal is  depressed.

Overtaking Acceleration Assist

Overtaking Acceleration Assist will oper

-

ate when the turn signal indicator is 
turned on to the left (left-hand drive) or 
turned on to the right (right-hand drive) 
while Smart Cruise Control is operating, 
and the following conditions are satis

-

fied:
僅 Your vehicle speed is above 40 mph 

(60 km/h)

僅 The hazard warning flasher is off
僅 A vehicle is detected in front of your 

vehicle

僅 Deceleration is not needed to main

-

tain distance with the vehicle in front

WARNING

僅 When the left turn signal indicator is 

turned on to the left (left-hand drive) 
or turned on to the right (right-hand 
drive) while there is a vehicle ahead, 
the vehicle may accelerate temporar

-

ily. Pay attention to the road condi

-

tions at all times.

僅 Regardless of your countries driving 

direction, Overtaking Acceleration 
Assist will operate when the condi

-

tions are satisfied. When using the 
function in countries with different 
driving direction, always check the 
road conditions at all times.

Display and control

Basic function

You can see the status of the Smart 
Cruise Control operation in the Driving 
Assist mode on the cluster. Refer to 
"Driving Assist mode" on page 4-92.
Smart Cruise Control will be displayed as 
below depending on the status of the 
function.
僅 When operating

Summary of Contents for Carnival 2023































































































































































































































































































































































































































































































































































































































Reviews:

No comments