manualshive.com logo in svg

Kia Carnival 2023, Owner'S Manual, Page: 381 / 606

Share
Download
Kia Carnival 2023 Owner'S Manual Download Page 381

Driving your vehicle

106

5

Smart Cruise Control (SCC)

僅 The distance is set to the last set dis

-

tance when the engine is restarted, or 
when the function was temporarily 
canceled.

To increase speed

僅 Push the + switch up and release it 

immediately. The set speed will 
increase by 1 mph (1 km/h) each time 
the switch is operated in this manner.

僅 Push the + switch up and hold it while 

monitoring the set speed on the clus

-

ter. The set speed will increase by 5 
mph (10 km/h) each time the switch is 
operated in this manner. Release the 
switch when the desired speed is 
shown, and the vehicle will accelerate 
to that speed. You can increase the 
set speed to 110 mph (180 km/h).

WARNING

Check the driving condition before using 
the + switch. Driving speed may sharply 
increase when you push up and hold the 
+ switch.

To decrease speed

僅 Push the - switch down and release it 

immediately. The set speed will 
decrease by 1 mph (1 km/h) each time 
the switch is operated in this manner.

僅 Push the - switch down and hold it 

while monitoring the set speed on the 
cluster. The set speed will decrease by 
5 mph (10 km/h) each time the switch 
is operated in this manner.
Release the switch at the speed you 
want to maintain. You can decrease 
the set speed to 20 mph (30 km/h).

To temporarily cancel Smart 
Cruise Control

Press the (

) switch or depress the 

brake pedal to temporarily cancel Smart 
Cruise Control.

OKA4040558N

OKA4040560N

OMQ4050131L

Summary of Contents for Carnival 2023































































































































































































































































































































































































































































































































































































































Reviews:

No comments