manualshive.com logo in svg

Kia Carnival 2023, Owner'S Manual, Page: 376 / 606

Share
Download
Kia Carnival 2023 Owner'S Manual Download Page 376

101

5

5

Driving your vehicle

Cruise Control (CC)

僅 When the hazard warning flasher is 

on, Blind-Spot View Monitor will turn 
off, regardless of the turn signal sta

-

tus.

僅 When other important warning is dis

-

played on the instrument cluster, 
Blind-Spot View Monitor may turn off.

Malfunction

When Blind-Spot View Monitor is not 
working properly, or the cluster display 
flickers, or the camera image does not 
display normally, have the function be 
inspected by an authorized Kia dealer.

WARNING

僅 If the camera lens is covered with for

-

eign material, Blind-Spot View Moni

-

tor may not operate normally. Always 
keep the camera lens clean.

僅 However, do not use chemical sol

-

vents such as strong detergents con

-

taining high alkaline or volatile 
organic solvents (gasoline, acetone 
etc.). This may damage the camera 
lens.

Cruise Control (CC) (if 
equipped)

(1) Cruise indicator
(2) Set speed
Cruise Control will allow you to drive at 
speeds above 20 mph (30 km/h) without 
depressing the accelerator pedal.

Cruise Control operation

To set speed

1. Accelerate to the desired speed, 

which must be more than 20 mph (30 
km/h).

2. Press the Driving Assist button at the 

desired speed. The set speed and 
Cruise (

) indicator will 

appear on the cluster.

3. Release the accelerator pedal.

OKA4052640N

OKA4040555N

Summary of Contents for Carnival 2023































































































































































































































































































































































































































































































































































































































Reviews:

No comments