manualshive.com logo in svg

Kia Carnival 2023, Owner'S Manual, Page: 350 / 606

Share
Download
Kia Carnival 2023 Owner'S Manual Download Page 350

75

5

5

Driving your vehicle

Blind-Spot Collision-Avoidance Assist (BCA)

Stopping vehicle and ending 
brake control

僅 When the vehicle is stopped due to 

emergency braking, the 'Drive care

-

fully' warning message will appear on 
the cluster.

僅 For your safety, the driver should 

depress the brake pedal immediately 
and check the surroundings.

僅 Brake control will end after the vehicle 

is stopped by emergency braking for 
approximately 2 seconds.

WARNING

Take the following precautions when 
using Blind-Spot Collision-Avoidance 
Assist:
僅 For your safety, change the Settings 

after parking the vehicle at a safe 
location.

僅 If any other function's warning mes

-

sage is displayed or audible warning 
is generated, Blind-Spot Collision-
Avoidance Assist warning message 
may not be displayed and audible 
warning may not be generated.

僅 You may not hear the warning sound 

of Blind-Spot Collision-Avoidance 
Assist if the surrounding is noisy.

僅 Blind-Spot Collision-Avoidance Assist 

may not operate if the driver applies 
the brake pedal to avoid collision.

僅 When Blind-Spot Collision-Avoidance 

Assist is operating, braking control by 
the function will automatically cancel 
when the driver excessively depresses 
the accelerator pedal or sharply steers 
the vehicle.

僅 During Blind-Spot Collision-Avoidance 

Assist operation, the vehicle may stop 
suddenly injuring passengers and 
shifting loose objects. Always have the 
seat belt on and keep loose objects 
secured.

僅 Even if there is a problem with Blind-

Spot Collision-Avoidance Assist, the 
vehicle's basic braking performance 
will operate normally.

僅 Blind-Spot Collision-Avoidance Assist 

does not operate in all situations or 
cannot avoid all collisions.

僅 Blind-Spot Collision-Avoidance Assist 

may warn the driver late or may not 
warn the driver depending on the 
road and driving conditions.

僅 Driver should maintain control of the 

vehicle at all times. Do not depend on 
Blind-Spot Collision-Avoidance Assist. 
Maintain a safe braking distance, and 
if necessary, depress the brake pedal 
to reduce driving speed or to stop the 
vehicle.

僅 Never operate Blind-Spot Collision-

Avoidance Assist on people, animal, 
objects, etc. It may cause serious 
injury or death.

WARNING

僅 The brake control may not operate 

properly depending on the status of 
ESC (Electronic Stability Control).

OKA4050123L

Summary of Contents for Carnival 2023































































































































































































































































































































































































































































































































































































































Reviews:

No comments