manualshive.com logo in svg

Kia Carnival 2023, Owner'S Manual, Page: 312 / 606

Share
Download
Kia Carnival 2023 Owner'S Manual Download Page 312

37

5

5

Driving your vehicle

Drive mode integrated control system

When ECO mode is activated:

僅 The acceleration response may be 

slightly reduced as the accelerator 
pedal is depressed moderately.

僅 The air conditioner performance may 

be limited.

僅 The shift pattern of the automatic 

transmission may change.

僅 The engine noise may get louder.
The above situations are normal condi

-

tions when ECO mode is activated to 
improve fuel efficiency.

SPORT mode

SPORT mode manages the 
driving dynamics by auto

-

matically adjusting the steering effort, 
the engine and transmission control 
logic for enhanced driver performance.
僅 When SPORT mode is selected by 

using the DRIVE MODE button, the 
SPORT indicator will appear.

僅 Whenever the engine is restarted, the 

Drive Mode will revert back to NOR

-

MAL mode. If SPORT mode is desired, 
re-select SPORT mode from the 
DRIVE MODE button.

僅 When SPORT mode is activated:

- The engine rpm will tend to remain 

raised over a certain length of time 
even after releasing the accelerator

- Upshifts are delayed when acceler

-

ating

NOTICE

In SPORT mode, the fuel efficiency may 
decrease.

SMART mode

SMART mode selects the 
proper driving mode 

among ECO, NORMAL, and SPORT by 
judging the driver's driving habits (i.e. 
Economic or Aggressive (Sportive)) from 
the brake pedal depression or the steer

-

ing wheel operation.
僅 Toggle the DRIVE MODE button to 

select SMART mode. When SMART 
mode is selected, the indicator 
appears on the instrument cluster.

僅 SMART mode automatically controls 

the vehicle driving, such as gear shift

-

ing patterns and engine torque, in 
accordance with the driver's driving 
habits.

NOTICE

僅 When you mildly drive the vehicle in 

SMART mode, the driving mode 
changes to ECO mode to improve fuel 
efficiency. However, the actual fuel 
efficiency may differ in accordance 
with your driving situations (i.e. 
upward/downward slope, vehicle 
deceleration/acceleration).

僅 When you dynamically drive the vehi

-

cle in SMART mode by abruptly decel

-

erating or sharply turning the driving 
mode changes to SPORT mode. How

-

ever, it may adversely affect fuel 
economy.

Summary of Contents for Carnival 2023































































































































































































































































































































































































































































































































































































































Reviews:

No comments