manualshive.com logo in svg

Kia Carnival 2023, Owner'S Manual, Page: 306 / 606

Share
Download
Kia Carnival 2023 Owner'S Manual Download Page 306

31

5

5

Driving your vehicle

Brake system

appears, then goes off if the ESC system 
is operating normally.
The ESC indicator light blinks whenever 
ESC is operating or appears when ESC 
fails to operate.
The ESC OFF indicator light comes on 
when the ESC is turned off with the but

-

ton.

WARNING

Electronic Stability Control

Drive carefully even though your vehicle 
has Electronic Stability Control. It can 
only assist you in maintaining control 
under certain circumstances.

ESC OFF usage

When driving

僅 ESC should be turned on for daily 

driving whenever possible.

僅 To turn ESC off while driving, press 

the ESC OFF button while driving on a 
flat road surface.

WARNING

Operating ESC

Never press the ESC OFF button while 
ESC is operating (ESC indicator light 
blinks).
If ESC is turned off while ESC is operat

-

ing, the vehicle may slip out of control.

NOTICE

僅 When operating the vehicle on a 

dynamometer, ensure that the ESC is 
turned off (ESC OFF light appeared). If 
the ESC is left on, it may prevent the 
vehicle speed from increasing, and 
result in false diagnosis.

僅 Turning the ESC off does not affect 

ABS or brake system operation.

Hill-start Assist Control (HAC)

A vehicle has the tendency to roll back 
on a steep hill when it starts to go after 
stopping. The Hill-start Assist Control 
(HAC) prevents the vehicle from rolling 
back by applying the brakes automati

-

cally for about 2 seconds.
The brakes are released when the accel

-

erator pedal is engaged or after about 2 
seconds.
The HAC is activated only for about 2 
seconds, so when the vehicle is starting 
off always engaged the accelerator 
pedal.

WARNING

Maintaining brake pressure on incline

HAC does not replace the need to apply 
brakes while stopped on an incline. 
While stopped, make sure you maintain 
brake pressure sufficient to prevent your 
vehicle from rolling backward and caus

-

ing an accident. Don't release the brake 
pedal until you are ready to accelerate 
forward.

Vehicle Stability Management 
(VSM) system

The Vehicle Stability Management (VSM) 
provides further enhancements to vehi

-

cle stability and steering responses 
under the following condition:
僅 when driving on a slippery road or
僅 when a change in the coefficient of 

friction between left and right wheels 
is detected.

Summary of Contents for Carnival 2023































































































































































































































































































































































































































































































































































































































Reviews:

No comments