manualshive.com logo in svg

Kia Carnival 2023, Owner'S Manual, Page: 302 / 606

Share
Download
Kia Carnival 2023 Owner'S Manual Download Page 302

27

5

5

Driving your vehicle

Brake system

Warning messages

The Auto Hold function will display a 
warning message with sound under cer

-

tain conditions.
When the EPB is applied from Auto Hold, 
a warning will sound and a message will 
appear.

When the conversion from Auto Hold to 
EPB is not working properly a warning 
will sound and a message will appear.

NOTICE

When this message is displayed, the 
Auto Hold and EPB may not operate. For 
your safety, press the brake pedal.

If you do not apply the brake pedal 
when you release the Auto Hold by 
pressing the [AUTO HOLD] switch, a 

warning will sound and a message will 
appear.

When you press the [AUTO HOLD] 
switch, if the driver's door, liftgate and 
engine hood are not closed, a warning 
will sound and a message will appear on 
the LCD display.

At this moment, press the [AUTO HOLD] 
button after closing the driver's door and 
engine hood.

Anti-lock Brake System (ABS)

The Anti-lock Brake System (ABS) pre

-

vents the wheels from locking. So the 
vehicle remains stable and can still be 
steered.
ABS (or ESC) will not prevent accidents 
due to improper or dangerous driving 
maneuvers. Even though vehicle control 
is improved during emergency braking, 

OMQ4050054L

OMQ4050055L

OMQ4050056L

OMQ4AH050057

Summary of Contents for Carnival 2023































































































































































































































































































































































































































































































































































































































Reviews:

No comments