manualshive.com logo in svg

Kia Carnival 2023, Owner'S Manual, Page: 300 / 606

Share
Download
Kia Carnival 2023 Owner'S Manual Download Page 300

25

5

5

Driving your vehicle

Brake system

NOTICE

During emergency braking by the EPB, 
the parking brake warning light will 
appear to indicate that the system is 
operating.

If you notice a continuous noise or burn

-

ing smell when the EPB is used for emer

-

gency braking, have your vehicle 
checked by an authorized Kia dealer.

When the EPB is not released

If the EPB does not release normally, 
take your vehicle to an authorized Kia 
dealer by loading the vehicle on a flat

-

bed tow truck and have the system 
checked.

AUTO HOLD

The Auto Hold is designed to maintain 
the vehicle in a standstill even though 
the brake pedal is not pressed after the 
driver brings the vehicle to a complete 
stop by pressing the brake pedal.

Applying Auto Hold function

1. Press the brake pedal and start the 

vehicle.

2. Press the Auto Hold button. The white 

AUTO HOLD indicator will come on 
indicating the system is in standby.

Before the Auto Hold will engage, the 
driver's door, liftgate and engine hood 
must be closed.

When coming to a complete stop by 
pressing the brake pedal, the AUTO 
HOLD indicator changes from white to 
green indicating the AUTO HOLD is 
engaged. The vehicle will remain at a 
standstill even if you release the brake 
pedal.
If the engine is restarted with the Auto 
Hold button pressed, Auto Hold will be in 
the standby state.
If EPB is applied, Auto Hold will be 
released.
If you press the accelerator pedal with 
the gear in D (Drive), R (Reverse) or 
Manual mode, the Auto Hold will be 
released automatically and the vehicle 
will start to move. The indicator changes 
from green to white indicating the Auto 
Hold is in standby and the EPB is 
released.
When driving off from Auto Hold by 
pressing the accelerator pedal, always 
check the surrounding area near your 
vehicle.
Slowly press the accelerator pedal for a 
smooth launch.

OKA4050014N

OKA4050016

Summary of Contents for Carnival 2023































































































































































































































































































































































































































































































































































































































Reviews:

No comments