Kia Carnival 2023, Owner'S Manual, Page: 293 / 606

Driving your vehicle
18 5
Automatic transmission (Shift Lever)
僅 Exercise extreme caution when driv -
ing on a slippery surface. Be espe
-
cially careful when braking,
accelerating or shifting gears. On a
slippery surface, an abrupt change in
vehicle speed can cause the drive
wheels to lose traction and the vehicle
to go out of control.
僅 Optimum vehicle performance and
economy is obtained by smoothly
depressing and releasing the acceler
-
ator pedal.
WARNING
僅 When driving uphill or downhill,
always shift to D (Drive) for driving
forward or shift to R (Reverse) for
driving backwards, and check the
gear position indicated on the cluster
before driving. Driving in the opposite
direction of the selected gear can lead
to a dangerous situation by shutting
off the engine and affecting the brak
-
ing performance.
僅 Always buckle-up! In a collision, an
unbelted occupant is significantly
more likely to be seriously injured or
killed than a properly belted occu
-
pant.
僅 Avoid high speeds when cornering or
turning.
僅 Do not make quick steering wheel
movements, such as sharp lane
changes or fast, sharp turns.
僅 The risk of a rollover is greatly
increased if you lose control of your
vehicle at highway speeds.
僅 Losing control often occurs if two or
more wheels drop off the roadway
and the driver oversteers to reenter
the roadway.
僅 In the event your vehicle leaves the
roadway, do not steer sharply.
Instead, slow down before pulling
back into the travel lanes.
僅 Never exceed posted speed limits.
WARNING
If your vehicle becomes stuck in snow,
mud, sand, etc., then you may attempt
to rock the vehicle free by moving it for
-
ward and backward. Do not attempt this
procedure if people or objects are any
-
where near the vehicle. During the rock
-
ing operation the vehicle may suddenly
move forward or backward as it
becomes unstuck, causing injury or
damage to nearby people or objects.
Moving up a steep grade from a
standing start
To move up a steep grade from a stand
-
ing start:
僅 Depress the brake pedal, shift the
shift lever to D (Drive).
Select the appropriate gear depend
-
ing on load weight and steepness of
the grade, and release the parking
brake. Depress the accelerator gradu
-
ally after releasing the service brakes.