manualshive.com logo in svg

Kia Carnival 2023, Owner'S Manual, Page: 285 / 606

Share
Download
Kia Carnival 2023 Owner'S Manual Download Page 285

Driving your vehicle

10

5

ENGINE START/STOP button

ENGINE START/STOP button 
(if equipped)

Illuminated ENGINE START/STOP 
button

The light will go off after about 30 sec

-

onds when the door is closed. It will also 
go off immediately when the theft-alarm 
system is armed.

ENGINE START/STOP button 
position

Your vehicle is equipped with four differ

-

ent ignition positions.

OFF

To turn off the engine (START/RUN posi

-

tion) or vehicle power (ON position), 
press the ENGINE START/STOP button 
with the gear in the P (Park) position. 
When you press the ENGINE START/
STOP button without the gear in the P 
(Park) position, the ENGINE START/
STOP button will not change to the OFF 
position but to the ACC position.

Anti-theft steering column lock 
(if equipped)

The steering wheel locks when the 
ENGINE START/STOP button is in the 

OFF position to protect you against 
theft.
It locks when the door is opened.
If the steering wheel is not locked prop

-

erly when you open the driver's door, the 
warning chime will sound. Try locking 
the steering wheel again. If the problem 
is not solved, have the system checked 
by an authorized Kia dealer.
In addition, if the ENGINE START/STOP 
button is in the OFF position after the 
driver's door is opened, the steering 
wheel will not lock and the warning 
chime will sound. In such a situation, 
close the door. Then the steering wheel 
will lock and the warning chime will stop.

NOTICE

If the steering wheel doesn't unlock 
properly, the ENGINE START/STOP but

-

ton will not work. Press the ENGINE 
START/STOP button while turning the 
steering wheel right and left to release 
the tension.

NOTICE

You are able to turn off the engine 
(START/RUN) or vehicle power (ON), 
only when the vehicle is not in motion.

CAUTION

In an emergency situation while the 
vehicle is in motion, you are able to turn 
the engine off and to the ACC position 
by pressing the ENGINE START/STOP 
button for more than 2 seconds or 3 
times repeatedly within 3 seconds.
If the vehicle is still moving, to restart the 
vehicle:

OKA4050100

Summary of Contents for Carnival 2023































































































































































































































































































































































































































































































































































































































Reviews:

No comments