manualshive.com logo in svg

Kia Carnival 2023, Owner'S Manual, Page: 258 / 606

Share
Download
Kia Carnival 2023 Owner'S Manual Download Page 258

163

4

4

Features of your vehicle

Interior features

Front seat (Type A)

Front seat (Type B)

Rear seat

With the ignition switch or ENGINE 
START/STOP button in the ON position:

僅 Push either of the levers/buttons to 

warm the driver's seat, the front pas

-

senger's seat or rear seats.

During mild weather or under conditions 
where the operation of the seat warmer 
is not needed, keep the levers/buttons in 
the "OFF" position.
The seat warmer defaults to the OFF 
position whenever the ignition switch or 
ENGINE START/STOP button is turned 
on.

Temperature control (Manual)

僅 Each time you press the levers/but

-

ton, the temperature setting of the 
seat will change as follows:
- Front seat (Type A)

- Front seat (Type B)

If you push the lever up when the 
lever is in the "OFF" position, the 
seat warmer is set to "HIGH". If you 
push the lever up or down, you can 
change the seat temperature.

- Rear seat

Temperature control (Automatic)

The seat warmer starts to automatically 
control the seat temperature in order to 
prevent low-temperature burns after 
being manually turned ON.

OKA4040581N

OKA4040423N

OKA4040424

Summary of Contents for Carnival 2023































































































































































































































































































































































































































































































































































































































Reviews:

No comments