manualshive.com logo in svg

Kia Carnival 2023, Owner'S Manual, Page: 254 / 606

Share
Download
Kia Carnival 2023 Owner'S Manual Download Page 254

159

4

4

Features of your vehicle

Storage compartment

Scheduled Ventilation (if 
equipped)

Scheduled ventilation is a convenient 
feature to help reduce the heat inside 
before getting into the vehicle.

To use the Scheduled ventilation func

-

tion, select 'Climate → Automatic Venti

-

lation → Scheduled Ventilation Control' 
on the infotainment system screen.The 
vehicle will be automatically ventilated at 
the selected time and date.

Storage compartment

These compartments can be used to 
store small items required by the driver 
or passengers.
僅 To avoid possible theft, do not leave 

valuables in the storage compart

-

ment.

僅 Always keep the storage compart

-

ment covers closed while driving. Do 
not attempt to place so many items in 
the storage compartment that the 
storage compartment cover cannot 
close securely.

Passenger's side open tray

Console box storage compartment (if 

equipped)

OKA4041155N

OKA4040414L

OKA4040416N

Summary of Contents for Carnival 2023































































































































































































































































































































































































































































































































































































































Reviews:

No comments