manualshive.com logo in svg

Kia Carnival 2023, Owner'S Manual, Page: 243 / 606

Share
Download
Kia Carnival 2023 Owner'S Manual Download Page 243

Features of your vehicle

148

4

Automatic climate control system

Mode selection

The mode selection button controls the 
direction of the air flow through the ven

-

tilation system.

The air flow outlet ports are switched in 
the following sequence:

Face-Level (B, D)

Air flow is directed toward the upper 
body and face. Additionally, each outlet 
can be controlled to direct the air dis

-

charged from the outlet.

Bi-Level (B, C, D, E)

Air flow is directed towards the face and 
the floor.

Floor-Level (A, C, D, E)

Most of the air flow is directed to the 
floor, with a small amount of the air 
being directed to the windshield, side 
window defrosters and side air vents.

Floor/Defrost-Level (A, C, D, E)

Most of the air flow is directed to the 
floor and the windshield with a small 
amount directed to the side window 
defrosters and side air vents.

Defrost-Level (A, D)

Most of the air flow is directed to the 
windshield with a small amount of air 
directed to the side window defrosters 
and side air vents.

Instrument panel vents

Front

Rear

You can adjust the direction of air deliv

-

ered from these vents using the vent 
control lever as shown.

OKA4040323

OKA4040309N

OKA4040334N

Summary of Contents for Carnival 2023































































































































































































































































































































































































































































































































































































































Reviews:

No comments