manualshive.com logo in svg

Kia Carnival 2023, Owner'S Manual, Page: 232 / 606

Share
Download
Kia Carnival 2023 Owner'S Manual Download Page 232

137

4

4

Features of your vehicle

Manual climate control system

Mode selection

The mode selection buttons control the 
direction of the air flow through the ven

-

tilation system.

Air can be directed to the floor, dash

-

board outlets, or windshield. Five sym

-

bols are used to represent Face, Bi-
Level, Floor, Floor-Defrost and Defrost 
air position.

Face-Level (B, D)

Air flow is directed toward the upper 
body and face. Additionally, each outlet 
can be controlled to direct the air dis

-

charged from the outlet.

 

Bi-Level (B, C, D, E)

Air flow is directed towards the face and 
the floor.

Floor-Level (A, C, D, E)

Most of the air flow is directed to the 
floor, with a small amount of the air 
being directed to the windshield, side 
window defrosters and side air vents.

Floor/Defrost-Level (A, C, D, E)

Most of the air flow is directed to the 
floor and the windshield with a small 
amount directed to the side window 
defrosters and side air vents.

Defrost-Level (A, D)

Most of the air flow is directed to the 
windshield with a small amount of air 
directed to the side window defrosters 
and side air vents.

Instrument panel vents

Front

Rear

You can adjust the direction of air deliv

-

ered from these vents using the vent 
control lever as shown.

Temperature control

The temperature control knob allows 
you to control the temperature of the air 
flowing from the ventilation system.

OKA4040306

OKA4040309N

OKA4040334N

Summary of Contents for Carnival 2023































































































































































































































































































































































































































































































































































































































Reviews:

No comments