manualshive.com logo in svg

Kia Carnival 2023, Owner'S Manual, Page: 206 / 606

Share
Download
Kia Carnival 2023 Owner'S Manual Download Page 206

111

4

4

Features of your vehicle

Warning lights and indicators

CAUTION

Low fuel level

Driving with the Low Fuel Level warning 
light on or with the fuel level below "E" 
can cause the engine to misfire and 
damage the catalytic converter.

Master warning light 

This indicator light appears:

僅 This warning light informs the driver 

the following situations
- LED headlamp malfunction (if 

equipped)

- Lamp malfunction
- High Beam Assist malfunction (if 

equipped)

To identify the details of the warning 
look at the LCD display.
If the warning situation is solved, the 
master warning light will turn off.

Low tire pressure warning light 

This warning light appears:

僅 Once you set the ignition switch or 

ENGINE START/STOP button to the 
ON position.
- It appears for approximately 3 sec

-

onds and then goes off.

僅 When one or more of your tires are 

significantly under inflated. (The loca

-

tion of the underinflated tires are dis

-

played on the LCD display).

* For more details, refer to "Tire Pressure 

Monitoring System (TPMS)" on page 6-
7.

This warning light remains on 
after blinking for approximately 
60 seconds or repeats blinking on 
and off at the intervals of 
approximately 3 seconds:

僅 When there is a malfunction with the 

TPMS.
In this case, have the vehicle 
inspected by an authorized Kia dealer.

* For more details, refer to "Tire Pressure 

Monitoring System (TPMS)" on page 6-
7.

WARNING

Low tire pressure

僅 Significantly low tire pressure makes 

the vehicle unstable and can contrib

-

ute to loss of vehicle control and 
increased braking distances.

僅 Continued driving or low pressure 

tires will cause the tires to overheat 
and fail.

WARNING

Safe stopping

僅 The TPMS cannot alert you to severe 

and sudden tire damage caused by 
external factors.

僅 If you notice any vehicle instability, 

immediately take your foot off the 
accelerator pedal, apply the brakes 
gradually with light force, and slowly 
move to a safe position off the road.

LED headlamp warning light 

This warning light appears:

僅 Once you set the ENGINE START/

STOP button to the ON position.

Summary of Contents for Carnival 2023































































































































































































































































































































































































































































































































































































































Reviews:

No comments