manualshive.com logo in svg

Kia Carnival 2023, Owner'S Manual, Page: 203 / 606

Share
Download
Kia Carnival 2023 Owner'S Manual Download Page 203

Features of your vehicle

108

4

Warning lights and indicators

With only one of the dual systems work

-

ing, more than normal pedal travel and 
greater pedal pressure are required to 
stop the vehicle.
Also, the vehicle will not stop in as short 
a distance with only a portion of the 
brake system working.
If the brakes fail while you are driving, 
shift to a lower gear for additional 
engine braking and stop the vehicle as 
soon as it is safe to do so.

NOTICE

Parking brake & brake fluid warning 
light

Driving the vehicle with a warning light 
ON is dangerous. If the Parking Brake & 
Brake Fluid Warning Light appears with 
the parking brake released, it indicates 
that the brake fluid level is low.
In this case, have your vehicle inspected 
by an authorized Kia dealer.

Anti-lock brake system (ABS) 
warning light 

This warning light appears:

僅 Once you set the ignition switch or 

ENGINE START/STOP button to the 
ON position.
- It appears for approximately 3 sec

-

onds and then goes off.

僅 When there is a malfunction with the 

ABS (The normal braking system will 
still be operational without the assis

-

tance of the anti-lock brake system).
In this case, have the vehicle 
inspected by an authorized Kia dealer.

Electronic Brake Force Distribu

-

tion (EBD) system warning light 

These two warning lights appear 
at the same time while driving:

僅 When the ABS and regular brake sys

-

tem are not working, have your vehi

-

cle inspected by an authorized Kia 
dealer.

WARNING

Electronic Brake Force Distribution 
(EBD) system warning light

When both ABS and parking brake & 
brake fluid warning lights are on, the 
brake system will not work normally and 
you may experience an unexpected and 
dangerous situation during sudden 
braking.
In this case, avoid high speed driving 
and abrupt braking.
Have your vehicle inspected by an 
authorized Kia dealer as soon as possi

-

ble.

Electronic Parking Brake (EPB) 

warning light 

This warning light appears:

僅 Once you set the ignition switch or 

ENGINE START/STOP button to the 
ON position.
- It appears for approximately 3 sec

-

onds and then goes off.

僅 When there is a malfunction with the 

EPB.
In this case, have the vehicle 
inspected by an authorized Kia dealer.

(3%

Summary of Contents for Carnival 2023































































































































































































































































































































































































































































































































































































































Reviews:

No comments