manualshive.com logo in svg

Kia Carnival 2023, Owner'S Manual, Page: 171 / 606

Share
Download
Kia Carnival 2023 Owner'S Manual Download Page 171

Features of your vehicle

76

4

Mirrors

僅 If the indicator (6) flashes in 

Orange, it indicates that the garage 
door is "Opening".

僅 The indicator (6) turns solid green 

once the garage door has fully 
opened.

僅 If the indicator (4) or (6) does not 

turn to green, it indicates that the 
last status of garage door was not 
received properly. The HomeLink 
mirror tries to receive the last 
known status of the garage door 
for a few seconds.

3) Recalling Garage Door Status

HomeLink mirror with Two-Way Com

-

munication provides a way to view the 
last stored message from the garage 
door opener. In order to recall the last 
known status of the last activated 
device, press the buttons "1 and 2" OR "2 
and 3" simultaneously.
僅 If the indicator (4) appears solid 

Green, it indicates that the last acti

-

vated device was "closed" properly.

僅 If the indicator (6) appears solid 

Green, it indicates that the last acti

-

vated device was "open" properly.

3. Erasing HomeLink씾 Buttons

1) Erasing and Reprogramming a 
Single HomeLink씾 Button:

1. Press and hold the desired HomeLink 

button you want to re-program. DO 
NOT release the button.

2. The HomeLink indicator light (7) will 

appear solid green. Release the but

-

ton as soon as the HomeLink indicator 
light (7) begins to flash orange, usu

-

ally about 20 seconds.

3. Proceed with the steps in the "Pro

-

gramming a New HomeLink Button" 
section.

NOTICE

If you do not complete the re-program

-

ming of a new device to the button, it will 
revert to the previously stored program

-

ming

2) The following instructions will 
erase ALL HomeLink씾 program

-

ming from ALL buttons:

1. Press and hold the buttons (1) and (3) 

simultaneously

2. The HomeLink indicator light (7) will 

appear solid Orange for about 10 sec

-

onds

3. Release the buttons once the Home

-

Link indicator light (7) changes to 
Green and flashes rapidly

4. Now all three HomeLink buttons (1), 

(2) and (3) are cleared of any pro

-

gramming

Information

HomeLink and the HomeLink House 
logo are registered trademarks of Gen

-

tex Corporation.

OKA4040545N

Summary of Contents for Carnival 2023































































































































































































































































































































































































































































































































































































































Reviews:

No comments