manualshive.com logo in svg

Kia Carnival 2023, Owner'S Manual, Page: 163 / 606

Share
Download
Kia Carnival 2023 Owner'S Manual Download Page 163

Features of your vehicle

68

4

Steering wheel

gauges. After adjusting, pull up the 
lock.

3. Pull up the lock-release lever to lock 

the steering wheel in place.
Push the steering wheel both up and 
down to be certain it is locked in posi

-

tion.

4. Be sure to adjust the steering wheel to 

the desired position before driving.

NOTICE

After adjustment, sometimes the lock-
release lever may not lock the steering 
wheel.
It is not a malfunction. This occurs when 
two gears engage. In this case, adjust 
the steering wheel again and then lock 
the steering wheel.

Heated steering wheel (if 
equipped)

When the ignition switch or ENGINE 
START/STOP button is in the ON posi

-

tion, pressing the heated steering wheel 
button warms the steering wheel. The 
indicator on the button will appear.

Type A

Type B

To turn the heated steering wheel off, 
press the button once again. The indica

-

tor on the button will turn off.
僅 The heated steering wheel defaults to 

the OFF position whenever the igni

-

tion switch or ENGINE START/STOP 
button is in the ON position.

NOTICE

The heated steering wheel will turn off 
automatically approximately 30 min

-

utes after the heated steering wheel is 
turned on.

CAUTION

僅 Do not install any type of grip cover 

for the steering wheel, it may impair 
the function of the heated steering 
wheel system.

僅 When cleaning the heated steering 

wheel, do not use an organic solvent 
such as paint thinner, benzene, alco

-

hol and gasoline. Doing so may dam

-

age the surface of the steering wheel.

僅 If the surface of the steering wheel is 

damaged by a sharp object, damage 
to the heated steering wheel compo

-

nents could occur.

OKA4040582N

OKA4040063N

Summary of Contents for Carnival 2023































































































































































































































































































































































































































































































































































































































Reviews:

No comments