manualshive.com logo in svg

Kia Carnival 2023, Owner'S Manual, Page: 155 / 606

Share
Download
Kia Carnival 2023 Owner'S Manual Download Page 155

Features of your vehicle

60

4

Fuel filler door

filler cap and filler door are securely 
closed, before starting the engine.

WARNING

Smoking

DO NOT use matches or a lighter and 
DO NOT SMOKE or leave a lit cigarette 
in your vehicle while at a gas station 
especially during refueling. Automotive 
fuel is highly flammable and can result 
in fire when ignited.

Make sure to refuel your vehicle accord

-

ing to "Fuel requirements" on page 1-2.
If the fuel filler cap requires replace

-

ment, use only a genuine Kia cap or the 
equivalent specified for your vehicle. An 
incorrect fuel filler cap can result in a 
serious malfunction of the fuel system or 
emission control system.

CAUTION

Exterior paint

Do not spill fuel on the exterior surfaces 
of the vehicle. Any type of fuel spilled on 
painted surfaces may damage the paint.

WARNING

僅 Do not allow anyone that has not dis

-

charged static electricity from their 
body to come close to an open fuel 
tank.

僅 Do not inhale vaporized fuel.

WARNING

Risk of injury from fuel

Fuels are poisonous and harmful to your 
health.
僅 Fuel contains substances that are 

harmful if inhaled.

僅 Do not swallow fuel or let it come into 

contact with skin, eyes or clothing.

僅 Do not inhale fuel vapors.
僅 Keep children away from fuel.
If you or other people come into contact 
with fuel, observe the following:
僅 Immediately rinse fuel off your skin 

with soap and water.

僅 If fuel comes into contact with your 

eyes, immediately rinse them thor

-

oughly with clean water. Seek medical 
attention immediately.

僅 If you swallow fuel, seek medical 

attention immediately. Do not induce 
vomiting.

僅 Change immediately out of clothing 

that has come into contact with fuel.

NOTICE

Damage caused by the wrong fuel

Fuel that does not conform to the 
required quality can lead to increased 
wear as well as damage to the engine 
and exhaust system. Only use the fuel 
recommended.

NOTICE

Damage caused by the wrong fuel

Vehicles with a gasoline engine:
Even small amounts of the wrong fuel 
could result in damage to the fuel sys

-

tem, the engine and the emission control 
system.

NOTICE

Do not use diesel or ethanol to refuel 
vehicles with a gasoline engine.

Summary of Contents for Carnival 2023































































































































































































































































































































































































































































































































































































































Reviews:

No comments