manualshive.com logo in svg

Kia Carnival 2023, Owner'S Manual, Page: 153 / 606

Share
Download
Kia Carnival 2023 Owner'S Manual Download Page 153

Features of your vehicle

58

4

Fuel filler door

5. To remove the fuel tank cap (2), turn it 

counterclockwise. You may hear a 
hissing noise as the pressure inside 
the tank equalizes.

6. Place the cap on the fuel filler door.

NOTICE

Before refueling, be sure to check what 
type of fuel is used for your vehicle.
If you put diesel or ethanol fuel into a 
gasoline-powered vehicle, it may affect 
the fuel system and cause serious dam

-

age to the vehicle.

NOTICE

If the fuel filler door does not open 
because ice has formed around it, tap 
lightly or push on the door to break the 
ice and release the door. Do not pry on 
the door. If necessary, spray around the 
door with an approved de-icer fluid (do 
not use radiator anti-freeze) or move the 
vehicle to a warm place and allow the ice 
to melt.

Closing the fuel filler door

To lock fuel filler door:
僅 Press the lock button on your smart 

key

僅 Press the Central Door lock button on 

armrest trim of driver's door

1. To install the fuel tank cap, turn it 

clockwise until it "Clicks".

2. Close the fuel filler door by pressing 

rear center edge of the fuel filler door. 
Make sure it is securely closed.

NOTICE

Press the vehicle's fuel door to LOCK 
position when the fuel filler door is com

-

pletely closed in order to lock the fuel 
filler door.
If the fuel filler door is not completely 
closed, the fuel filler door will not be 
locked.

WARNING

Refueling

Always remove the fuel cap carefully 
and slowly. If the cap is venting fuel or if 
you hear a hissing sound, wait until the 
condition stops before completely 
removing the cap.
If pressurized fuel sprays out, it can 
cover your clothes or skin and subject 
you to the risk of fire and burns.

NOTICE

When refueling on unlevel ground, the 
fuel gauge may not point to the F posi

-

tion. It is not a malfunction. If you move 
your vehicle to a level ground, the fuel 
gauge will move to the full position.

NOTICE

Tighten the cap until it clicks one time, 
otherwise, the engine warning indicator 
light will appear.

OKA4040054

Summary of Contents for Carnival 2023































































































































































































































































































































































































































































































































































































































Reviews:

No comments