manualshive.com logo in svg

Kia Carnival 2023, Owner'S Manual, Page: 141 / 606

Share
Download
Kia Carnival 2023 Owner'S Manual Download Page 141

Features of your vehicle

46

4

Liftgate Auto Close

Liftgate Auto Close (if 
equipped)

On a vehicle equipped with a smart key, 
the liftgate can be closed using the Lift

-

gate Auto Close system.

How to use the Liftgate Auto 
Close

The liftgate can be closed with no-touch 
activation satisfying all the conditions 
below.
僅 Liftgate is open.
僅 Positioned in the detecting area for 

more than 3 seconds.

僅 When you leave the vehicle carrying a 

smart key.

1. Setting

To activate the Liftgate Auto Close 
system, select Smart Liftgate on the 
LCD display or infotainment system.
For more details, refer to "User set

-

tings mode (if equipped)" on page 4-
93.
If your vehicle is equipped with an 
infotainment system, you can learn 
how to setup on the website via QR 
code in the infotainment quick refer

-

ence guide.

2. Detect and Alert

If you are positioned in the detecting 
area (20 ~ 40 in [50 ~ 100 cm] behind 
the vehicle) carrying a smart key 
when the liftgate is opened, the haz

-

ard warning lights will blink and chime 
will sound to alert you the smart key 
has been detected.

3. Automatic closing

When you leave the vehicle carrying a 
smart key, the chime will sound 3 
times preparatory to the function and 
then the liftgate will be closed after 
the chime sounds 2 times.

OKA4040482N

OKA4040476N

OKA4040482N

Summary of Contents for Carnival 2023































































































































































































































































































































































































































































































































































































































Reviews:

No comments