manualshive.com logo in svg

Kia Carnival 2023, Owner'S Manual, Page: 110 / 606

Share
Download
Kia Carnival 2023 Owner'S Manual Download Page 110

15

4

4

Features of your vehicle

Immobilizer system

be kept confidential. Do not leave this 
number anywhere in your vehicle.

NOTICE

僅 Do not put metal accessories near the 

ignition switch.

僅 Metal accessories may interrupt the 

transponder signal and may prevent 
the engine from being started.

NOTICE

If you need additional keys or lose your 
keys, consult an authorized Kia dealer.

CAUTION

Immobilizer damage

Do not expose your immobilizer system 
to moisture, static electricity or rough 
handling. This may damage your immo

-

bilizer.

CAUTION

Immobilizer alterations

Do not change, alter or adjust the immo

-

bilizer system because it could cause the 
immobilizer system to malfunction.

Smart key immobilizer system

The immobilizer system protects your 
vehicle from theft. If an improperly 
coded key (or other device) is used, the 
vehicle's power system is disabled.
When the ENGINE START/STOP button 
is placed in the ON position, the immobi

-

lizer system indicator should come on 
briefly, then go off. If the indicator starts 
to blink, the system does not recognize 
the coding of the key.
Place the ENGINE START/STOP button 
in the OFF position, then place the 

ENGINE START/STOP button in the ON 
position again.
If the system repeatedly does not recog

-

nize the coding of the key, contact your 
Kia dealer.
Do not attempt to alter this system or 
add other devices to it. Electrical prob

-

lems could result that may make your 
vehicle inoperable.

Deactivating the immobilizer sys

-

tem

Change the ENGINE START/STOP but

-

ton to the ON position.

Activating the immobilizer sys

-

tem

Change the ENGINE START/STOP but

-

ton to the OFF position. The immobilizer 
system activates automatically. Without 
a valid smart key for your vehicle, the 
engine will not start.

NOTICE

When starting the vehicle, do not use the 
key with other immobilizer keys around. 
Otherwise, the vehicle may not start or 
may stop soon after it starts. Keep each 
key separate in order to avoid a starting 
malfunction.

NOTICE

If you need additional keys or lose your 
keys, contact an authorized Kia dealer.

This device complies with Part 15 
of the FCC rules.

Operation is subject to the following two 
conditions:
1. This device may not cause harmful 

interference, and

Summary of Contents for Carnival 2023































































































































































































































































































































































































































































































































































































































Reviews:

No comments