manualshive.com logo in svg

Kia Carnival 2022, Owner'S Manual, Page: 77 / 687

Share
Download
Kia Carnival 2022 Owner'S Manual Download Page 77

53

3

3

Safety features of your vehicle

Child Restraint System (CRS)

Securing a child restraint seat with 
"Tether Anchor" system

2nd row seat

2nd row center seat

2nd row seat (VIP Lounge Seat) (if 

equipped)

3rd row seat

First secure the child restraint with 
the LATCH lower anchors or the 
seat belt. If the child restraint man

-

ufacturer recommends that the top 
tether strap be attached, attach 
and tighten the top tether strap to 
the top tether strap anchor.

Child restraint system tether 
anchorages are located on the back 
of the rear cushions.

WARNING

Take the following precautions 
when installing the tether strap:
䳜 Read and follow all installation 

instructions provided with your 
Child Restraint System.

䳜 NEVER attach more than one child 

restraint to a single tether anchor. 
This could cause the anchor or 
attachment to come loose or 
break.

䳜 Do not attach the tether strap to 

anything other than the correct 
tether anchor. It may not work 

OKA4030151L

OKA4030151N

OKA4030106

OKA4030108L

Summary of Contents for Carnival 2022
















































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments