manualshive.com logo in svg

Kia Carnival 2022, Owner'S Manual, Page: 75 / 687

Share
Download
Kia Carnival 2022 Owner'S Manual Download Page 75

51

3

3

Safety features of your vehicle

Child Restraint System (CRS)

8 seats

7 seats

LATCH anchors have been provided 
in the left and right outboard rear 
seating positions. Their locations are 
shown in the illustration. There are 
no LATCH anchors provided for the 
3rd row center seating position.

WARNING

LATCH Lower Anchors

Never attempt to attach a LATCH 
equipped seat in the center seating 
position. LATCH lower anchors are 
only to be used in the left and right 
rear outboard seating positions. You 

may damage the anchors or the 
anchors may fail and break in a colli

-

sion if the seat is in the center seat

-

ing position.

The lower anchor position indicator 
symbols are located on the left and 
right rear seatbacks to identify the 
position of the lower anchors in 
your vehicle (see arrows in illustra

-

tion).

1. Lower Anchor position indicator
2. Lower Anchor

The LATCH anchors are located 
between the seatback and the seat 
cushion of the rear seat left and 
right outboard seating positions.

To use the lower anchor, push the 
upper portion of the lower anchor 
cover.

OKA4030059L

OKA4030059

OKA4030060N

Summary of Contents for Carnival 2022
















































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments