manualshive.com logo in svg

Kia Carnival 2022, Owner'S Manual, Page: 622 / 687

Share
Download
Kia Carnival 2022 Owner'S Manual Download Page 622

Maintenance

52

7

Fuses

3. Pull the suspected fuse straight 

out. Use the removal tool pro

-

vided in the main fuse box in the 
engine compartment.

4. Check the removed fuse; replace it 

if it is blown.
Spare fuses are provided in the 
instrument panel fuse panel (or in 
the engine compartment fuse 
panel).

5. Push in a new fuse of the same 

rating, and make sure it fits 
tightly in the clips.

If it fits loosely, consult an autho

-

rized Kia dealer.

If you do not have a spare, use a 
fuse of the same rating from a cir

-

cuit you may not need for operating 
the vehicle, such as the cigarette 
lighter fuse.

If the headlamps or taillamps, stop

-

lights, courtesy lamp, day time run

-

ning lights (DRL) do not work and 
the fuses are OK, consult an autho

-

rized Kia dealer.

Engine compartment fuse replace

-

ment

1. Turn the ignition and all other 

switches off.

2. Remove the fuse panel cover by 

pressing the tab and pulling the 
cover up.

3. Check the removed fuse; replace it 

if it is blown. To remove or insert 
the fuse, use the fuse puller in the 
engine compartment fuse panel.

4. Push in a new fuse of the same 

rating, and make sure it fits 
tightly in the clips. If it fits loosely, 
consult an authorized Kia dealer.

CAUTION

After checking the fuse panel in the 
engine compartment, securely 
install the fuse panel cover through 
the audible clicking sound.
If not, electrical failures may occur 
from water contact.

OKA4070015

OKA4070017

Summary of Contents for Carnival 2022
















































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments