manualshive.com logo in svg

Kia Carnival 2022, Owner'S Manual, Page: 599 / 687

Share
Download
Kia Carnival 2022 Owner'S Manual Download Page 599

29

7

7

Maintenance

Wiper blades

Wiper blades

When the wipers no longer clean 
adequately, the blades may be worn 
or cracked, and require replacement.

To prevent damage to the wiper 
arms or other components, do not 
attempt to move the wipers manu

-

ally.

The use of a non-specified wiper 
blade could result in wiper malfunc

-

tion and failure.

Blade inspection

NOTICE

Commercial hot waxes applied by 
automatic car washes have been 
known to make the windshield diffi

-

cult to clean.

Contamination of either the wind

-

shield or the wiper blades with for

-

eign matter can reduce the 
effectiveness of the windshield wip

-

ers. Common sources of contamina

-

tion are insects, tree sap, and hot 
wax treatments used by some com

-

mercial car washes. If the blades are 
not wiping properly, clean both the 
window and the blades with a good 
cleaner or mild detergent, and rinse 
thoroughly with clean water.

CAUTION

To prevent damage to the wiper 
blades, do not use gasoline, kero

-

sene, paint thinner, or other sol

-

vents on or near them.

Blade replacement

When the wipers no longer clean 
adequately, the blades may be worn 
or cracked, and require replacement.

CAUTION

To prevent damage to the wiper 
arms or other components, do not 
attempt to move the wipers manu

-

ally.

CAUTION

The use of a non-specified wiper 
blade could result in wiper malfunc

-

tion and failure.

OKA4070067N

Summary of Contents for Carnival 2022
















































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments