manualshive.com logo in svg

Kia Carnival 2022, Owner'S Manual, Page: 552 / 687

Share
Download
Kia Carnival 2022 Owner'S Manual Download Page 552

What to do in an emergency

16

6

If you have a flat tire (with spare tire)

If you have a flat tire (with 
spare tire)

If you have a flat tire, you can 
change the flat tire to a spare tire 
using tools.

WARNING

Driving on a flat tire will cause per

-

manent damage to the tire. Re-
inflating a tire after it has been 
driven on while severely underin

-

flated or flat may cause a blowout 
and a serious crash. Never attempt 
to re-inflate a tire that has been 
driven on while severely underin

-

flated or flat. In this case, repair or 
replace the flat tire as soon as pos

-

sible.

WARNING

Changing a tire can be dangerous. 
Follow the instructions in this sec

-

tion when changing a tire to reduce 
the risk of serious injury or death.

CAUTION

Be careful as you use the jack han

-

dle to stay clear of the flat end. The 
flat end has sharp edges that could 
cause cuts.

Jack and tools

The jack and wheel lug nut wrench 
are stored in the luggage compart

-

ment.

Pull up the luggage box cover to 
reach this equipment.
1. Jack
2. Wheel lug nut wrench

Jacking instructions

The jack is provided for emergency 
tire changing only.
䳜 To prevent the jack from "rattling" 

while the vehicle is in motion, 
store it properly.

䳜 Follow jacking instructions to 

reduce the possibility of personal 
injury.

OKA4060034N

Summary of Contents for Carnival 2022
















































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments