manualshive.com logo in svg

Kia Carnival 2022, Owner'S Manual, Page: 551 / 687

Share
Download
Kia Carnival 2022 Owner'S Manual Download Page 551

15

6

6

What to do in an emergency

Tire Pressure Monitoring System (TPMS)

for less than 1 mile (1.6 km) in that 
3 hour period.

Never use tire sealant if your vehicle 
is equipped with a TPMS. The liquid 
sealant can damage the tire pres

-

sure sensors.
䳜 The TPMS cannot alert you to 

severe and sudden tire damage 
caused by external factors such 
as nails or road debris.

䳜 If you feel any vehicle instability, 

immediately take your foot off 
the accelerator, apply the brakes 
gradually and with light force, and 
slowly move to a safe position off 
the road.

NOTICE

Protecting TPMS

Tampering with, modifying, or dis

-

abling the Tire Pressure Monitoring 
System (TPMS) components may 
interfere with the system's ability 
to warn the driver of low tire pres

-

sure conditions and/or TPMS mal

-

functions. Tampering with, 
modifying, or disabling the Tire 
Pressure Monitoring System (TPMS) 
components may void the warranty 
for that portion of the vehicle.

This device complies with Part 15 
of the FCC rules.

Operation is subject to the following 
three conditions:
1. This device may not cause harm

-

ful interference, and

2. This device must accept any 

interference received, including 
interference that may cause 
undesired operation.

3. Changes or modifications not 

expressly approved by the party 
responsible for compliance could 
void the user's authority to oper

-

ate the device.

Summary of Contents for Carnival 2022
















































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments