manualshive.com logo in svg

Kia Carnival 2022, Owner'S Manual, Page: 536 / 687

Share
Download
Kia Carnival 2022 Owner'S Manual Download Page 536

Driving your vehicle

204

5

Vehicle weight

GAW (Gross axle weight)

This is the total weight placed on 
each axle (front and rear) - including 
vehicle curb weight and all payload.

GAWR (Gross axle weight rating)

This is the maximum allowable 
weight that can be carried by a sin

-

gle axle (front or rear). These num

-

bers are shown on the certification 
label.

The total load on each axle must 
never exceed its GAWR.

GVW (Gross vehicle weight)

This is the Base Curb Weight plus 
actual Cargo Weight plus passen

-

gers.

GVWR (Gross vehicle weight rating)

This is the maximum allowable 
weight of the fully loaded vehicle 
(including all options, equipment, 
passengers and cargo). The GVWR is 
shown on the certification label 
located on the driver's (or front pas

-

senger's) door sill.

Overloading

WARNING

Vehicle weight

The gross axle weight rating 
(GAWR) and the gross vehicle weight 
rating (GVWR) for your vehicle are 
on the certification label attached to 
the driver's (or front passenger's) 
door. Exceeding these ratings can 
cause an accident or vehicle dam

-

age. You can calculate the weight of 
your load by weighing the items 
(and people) before putting them in 
the vehicle. Be careful not to over

-

load your vehicle.

Summary of Contents for Carnival 2022
















































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments