manualshive.com logo in svg

Kia Carnival 2022, Owner'S Manual, Page: 51 / 687

Share
Download
Kia Carnival 2022 Owner'S Manual Download Page 51

27

3

3

Safety features of your vehicle

Seat

Left and right adjustment (VIP 
Lounge Seat)

To move the seat left side or right 
side:
1. Pull the seat slide adjustment 

lever up and hold it.

2. Slide the seat to the position you 

desire.

3. Release the lever and make sure 

the seat is locked in place.

Adjust the seat before driving, and 
make sure the seat is locked 
securely by trying to move left side 
and right side without using the 
lever. If the seat moves, it is not 
locked properly.

Seat cushion height adjustment 
(VIP Lounge Seat)

To change the height of the seat 
cushion:
1. Push the lever upwards or down

-

wards to adjust the seat cushion 
height.

2. Release the switch once the seat 

reaches the desired position.

Seatback angle (VIP Lounge Seat)

To recline the seatback:
1. Push the control switch forward 

or backward to move the seat

-

back to the desired angle.

OKA4030036

OKA4030162L

OKA4030037

Summary of Contents for Carnival 2022
















































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments