manualshive.com logo in svg

Kia Carnival 2022, Owner'S Manual, Page: 479 / 687

Share
Download
Kia Carnival 2022 Owner'S Manual Download Page 479

147

5

5

Driving your vehicle

Navigation-based Smart Cruise Control (NSCC)

actual speed limit information on 
the road. It is the driver's respon

-

sibility to check the speed limit on 
the actual driving road or lane.

䳜 Navigation-based Smart Cruise 

Control will automatically be can

-

celed when you leave the highway 
(or motorway) main road. Always 
pay attention to road and driving 
conditions while driving.

䳜 Navigation-based Smart Cruise   

Control may not operate due to 
the existence of leading vehicles 
and the driving conditions of the 
vehicle. Always pay attention to 
road and driving conditions while 
driving.

䳜 When you are towing a trailer or 

another vehicle, we recommend 
that Navigation-based Smart 
Cruise Control is turned off due to 
safety reasons.

䳜 After you pass through a tollgate 

on a highway (or motorway), 
Navigation-based Smart Cruise 
Control will operate based on the 
first lane. If you enter one of the 
other lanes, the function might 
not operate properly.

䳜 The vehicle will accelerate if the 

driver depresses the accelerator 
pedal while Navigation-based 
Smart Cruise Control is operating, 
and the function will not deceler

-

ate the vehicle.

䳜 If the driver accelerates and 

releases the accelerator pedal 
while Navigation-based Smart 

Cruise Control is operating, the 
vehicle may not decelerate suffi

-

ciently or may rapidly decelerate 
to a safe speed.

䳜 If the curve is too large or too 

small, Navigation-based Smart 
Cruise Control may not operate.

NOTICE

䳜 The time gap could occur between 

the navigation's guidance and 
when Navigation-based Smart 
Cruise Control operation starts 
and ends.

䳜 The speed information on the 

cluster and navigation may differ.

䳜 Even if you are driving at a speed 

lower than Smart Cruise Control 
set speed, acceleration may be 
limited by the curve sections 
ahead.

䳜 If Navigation-based Smart Cruise 

Control is operating while leaving 
the main road to enter an inter

-

change, junction, rest area, etc., 
the function may operate for a 
certain period of time.

䳜 Deceleration by Navigation-based 

Smart Cruise Control may feel it is 
not sufficient due to road condi

-

tions such as uneven road sur

-

faces, narrow lanes, etc.

Summary of Contents for Carnival 2022
















































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments