manualshive.com logo in svg

Kia Carnival 2022, Owner'S Manual, Page: 47 / 687

Share
Download
Kia Carnival 2022 Owner'S Manual Download Page 47

23

3

3

Safety features of your vehicle

Seat

Pull the removal strap or lever and 
lift the rear portion of the seat 
cushion. Then the rear catches will 
be released. Remove the seat while 
lifting up the rear portion of seat 
cushion and then reinstalling the 
tumble seat.

Stowing the rear seat (3rd row)

The rear seat can be folded and 
stowed in the luggage compartment 
to provide additional cargo space.

To stow the rear seat:
1. Lower the headrest to the lowest 

position (1). To stow easily, adjust 

the seatback (2) to upright posi

-

tion. (if necessary)

2. Pull up the seat by using the 

stowing lever (3).

3. Stow the seat by pushing down 

firmly.

OKA4030123N

OKA4030124N

OKA4030042L

OKA4030043

OKA4030044N

Summary of Contents for Carnival 2022
















































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments