manualshive.com logo in svg

Kia Carnival 2022, Owner'S Manual, Page: 468 / 687

Share
Download
Kia Carnival 2022 Owner'S Manual Download Page 468

Driving your vehicle

136

5

Smart Cruise Control (SCC)

When the front radar cover or sen

-

sor is covered with snow, rain, or 
foreign material, it can reduce the 
detecting performance and tempo

-

rarily limit or disable Smart Cruise 
Control.

If this occurs, the 'Smart Cruise Con

-

trol disabled. Radar blocked' (or 'SCC 
(Smart Cruise Control) disabled. 
Radar blocked') warning message 
will appear for a certain period of 
time on the cluster.

The function will operate normally 
when snow, rain or foreign material 
is removed.

WARNING

䳜 Even though the warning mes

-

sage does not appear on the clus

-

ter, Smart Cruise Control may not 
properly operate.

䳜 Smart Cruise Control may not 

properly operate in an area (e.g. 
open terrain), where there is 
nothing to detect after turning 
ON the engine.

Limitations

Smart Cruise Control may not oper

-

ate normally, or the function may 
operate unexpectedly under the fol

-

lowing circumstances:
䳜 The detecting sensor or the sur

-

roundings are contaminated or 
damaged

䳜 Washer fluid is continuously 

sprayed, or the wiper is on

䳜 The camera lens is contaminated 

due to tinted, filmed or coated 
windshield, damaged glass, or 
stuck of foreign material (sticker, 
bug, etc.) on the glass

䳜 Moisture is not removed or frozen 

on the windshield

䳜 The field of view of the front view 

camera is obstructed by sun glare

䳜 Street light or light from an 

oncoming vehicle is reflected on 
the wet road surface, such as a 
puddle on the road

䳜 The temperature around the 

front view camera is high or low

䳜 An object is placed on the dash

-

board

䳜 The surrounding is very bright
䳜 The surrounding is very dark, such 

as in a tunnel, etc.

䳜 The brightness changes sud

-

denly, for example when entering 
or exiting a tunnel

䳜 The brightness outside is low, and 

the headlamps are not on or are 
not bright

䳜 Driving in heavy rain or snow, or 

thick fog

䳜 Driving through steam, smoke or 

shadow

䳜 Only part of the vehicle is 

detected

䳜 The vehicle in front has no tail 

lights, tail lights are located 
unusually, etc.

Summary of Contents for Carnival 2022
















































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments