manualshive.com logo in svg

Kia Carnival 2022, Owner'S Manual, Page: 459 / 687

Share
Download
Kia Carnival 2022 Owner'S Manual Download Page 459

127

5

5

Driving your vehicle

Smart Cruise Control (SCC)

To decrease speed

䳜 Push the - switch down and 

release it immediately. The cruis

-

ing speed will decrease by 1 mph 
(1 km/h) each time the switch is 
operated in this manner.

䳜 Push the - switch down and hold 

it while monitoring the set speed 
on the cluster. The cruising speed 
will decrease by 5 mph (10 km/h) 
each time the switch is operated 
in this manner.
Release the switch at the speed 
you want to maintain. You can set 
the speed to 20 mph (30 km/h).

To temporarily cancel the function

Press the (

) switch or depress 

the brake pedal to temporarily can

-

cel Smart Cruise Control.

To resume the function

To resume Smart Cruise Control 
after the function was canceled, 
push the +, - or (

) switch.

If you push the + switch up or - 
switch down, vehicle speed will be 
set to the current speed on the 
cluster.

If you push the (

) switch, vehicle 

speed will resume to the preset 
speed.

WARNING

Check the driving condition before 
using the (

) switch. Driving 

speed may sharply increase or 
decrease when you press the (

) 

switch.

OKA4040560N

OMQ4050131L

OMQ4050205

Summary of Contents for Carnival 2022
















































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments