manualshive.com logo in svg

Kia Carnival 2022, Owner'S Manual, Page: 448 / 687

Share
Download
Kia Carnival 2022 Owner'S Manual Download Page 448

Driving your vehicle

116

5

Driver Attention Warning (DAW)

Leading vehicle departure alert 
function

When the front vehicle departs from 
a stop, Leading Vehicle Departure 
Alert will inform the driver by dis

-

playing the 'Leading vehicle is driving 
away' (or 'Leading vehicle is driving 
on') message on the cluster and an 
audible warning will sound.

WARNING

䳜 If any other function's warning 

message is displayed or audible 
warning is generated, Leading 
Vehicle Departure Alert warning 
message may not be displayed 
and audible warning may not be 
generated.

䳜 The driver should hold the 

responsibility to safely drive and 
control the vehicle.

CAUTION

䳜 Leading Vehicle Departure Alert is 

a supplemental function and may 
not alert the driver whenever the 
front vehicle departs from a stop.

䳜 Always check the front of the 

vehicle and road conditions before 
departure.

Malfunction and limitations

Malfunction

When Driver Attention Warning is 
not working properly, the 'Check 
Driver Attention Warning (DAW) 
system' warning message will 
appear on the cluster. If this occurs, 
have the function be inspected by 
an authorized Kia dealer.

OKA4050533N

OMQ4050118L

Summary of Contents for Carnival 2022
















































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments