manualshive.com logo in svg

Kia Carnival 2022, Owner'S Manual, Page: 441 / 687

Share
Download
Kia Carnival 2022 Owner'S Manual Download Page 441

109

5

5

Driving your vehicle

Intelligent Speed Limit Assist (ISLA)

Changing set speed

If the speed limit of the road 
changes during the operation of 
Manual Speed Limit Assist or Smart 
Cruise Control, an arrow in the 
direction of up or down is displayed 
to inform the driver that the set 
speed needs to be changed. At this 
time, the driver can change the set 
speed according to the speed limit 
by using the + or 䳍 switch on the 
steering wheel.

WARNING

䳜 If the Offset is set over '0', the set 

speed will change to a higher 
speed than the speed limit of the 
road. If you want to drive below 
the speed limit, set the Offset 
under '0' or use the 䳍 switch on 
the steering wheel to lower the 
set speed.

䳜 Even after changing the set speed 

according to the speed limit of the 
road, the vehicle can still be driven 
over the speed limit. If necessary, 
depress the brake pedal to reduce 
your driving speed.

䳜 If the speed limit of the road is 

under 20 mph (30 km/h), the set 
speed change function will not 
work.

䳜 Intelligent Speed Limit Assist 

operates using the speed unit in 
the instrument cluster set by the 
driver. If the speed unit is set to a 
unit other than the speed unit 
used in your country, Intelligent 
Speed Limit Assist may not oper

-

ate properly.

NOTICE

For more details on operation of 
Smart Cruise Control, refer to 
"Smart Cruise Control (SCC) (if 
equipped)" on page 5-124.

OMQ4A050357

OMQ4A050358

Summary of Contents for Carnival 2022
















































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments