manualshive.com logo in svg

Kia Carnival 2022, Owner'S Manual, Page: 41 / 687

Share
Download
Kia Carnival 2022 Owner'S Manual Download Page 41

17

3

3

Safety features of your vehicle

Seat

Rear seat adjustment

Forward and backward adjustment 
(2nd row seat)

To move the seat forward or back

-

ward:
1. Pull the seat slide adjustment 

lever up and hold it.

2. Slide the seat to the position you 

desire.

3. Release the lever and make sure 

the seat is locked in place.

Adjust the seat before driving, and 
make sure the seat is locked 
securely by trying to move forward 
and backward without using the 
lever. If the seat moves, it is not 
locked properly.

Seatback angle (2nd, 3rd row seat)

2nd row outboard seat

2nd row center seat (for 8 seats)

3rd row seat

To recline the seatback:

OKA4030021L

OKA4030022L

OKA4030148L

OKA4030152L

Summary of Contents for Carnival 2022
















































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments