manualshive.com logo in svg

Kia Carnival 2022, Owner'S Manual, Page: 409 / 687

Share
Download
Kia Carnival 2022 Owner'S Manual Download Page 409

77

5

5

Driving your vehicle

Lane Keeping Assist (LKA)

䳜 If 'Off' is selected, the function will 

turn off. The (

) indicator 

light will turn off on the cluster.

WARNING

䳜 If 'Lane Departure Warning' is 

selected, steering is not assisted.

䳜 Lane Keeping Assist does not con

-

trol the steering wheel when the 
vehicle is driven in the middle of 
the lane.

䳜 The driver should always be 

aware of the surroundings and 
steer the vehicle if 'Off' is 
selected.

Turning On/Off (Lane Safety but

-

ton)

With the engine on, press an hold 
the Lane Safety button located on 
the instrument panel to turn on 
Lane Keeping Assist. The white 
(

) indicator light will illuminate 

on the cluster.

Press and hold the button again to 
turn off the function.

If the engine is restarted, Lane 
Keeping Assist will maintain the last 
setting.

NOTICE

When Lane Keeping Assist is turned 
off with the Lane Safety button, 
Lane Safety settings will turn off.

Warning volume

With the engine on, select 'Driver 
Assistance → Warning Volume' from 
the Settings menu to change the 
Warning Volume to 'High', 'Medium', 
or 'Low' for Lane Keeping Assist.

If you change the Warning Volume, 
the Warning Volume of other Driver 
Assistance functions may be 
changed.

OKA4050024N

OMQ4AH050335

Summary of Contents for Carnival 2022
















































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments