Kia Carnival 2022 Owner'S Manual Download Page 396

Page: 396 / 687

Driving your vehicle

Forward Collision-Avoidance Assist (FCA) (Sensor

fusion)

collision level: 'Collision Warning',
'Emergency Braking' and 'Stopping
vehicle and ending brake control'.

Collision warning

䳜 To warn the driver of a collision,

the 'Collision Warning' warning
message will appear on the clus

ter and an audible warning will
sound.

䳜 If a vehicle is detected in front,

the function will operate when
your vehicle speed is between
approximately 6 ~ 112 mph (10 ~
180 km/h).

䳜 If a pedestrian or cyclist is

detected in front, the function will
operate when your vehicle speed
is between approximately 6 ~ 53
mph (10 ~ 85 km/h).

䳜 If 'Active Assist' is selected, brak

ing may be assisted.

Emergency braking

䳜 To warn the driver that emer

gency braking will be assisted, the
'Emergency Braking' warning
message will appear on the clus

ter and an audible warning will
sound.

䳜 If a vehicle is detected in front,

the function will operate when
your vehicle speed is between
approximately 6 ~ 47 mph (10 ~
75 km/h).

䳜 If a pedestrian or cyclist is

detected in front, the function will
operate when your vehicle speed
is between approximately 6 ~ 40
mph (10 ~ 65 km/h).

䳜 In emergency braking situation,

braking is assisted with strong
braking power by the function to
help prevent collision with the
vehicle, pedestrian or cyclist
ahead.

OKA4050134L

OKA4050135L

Summary of Contents for Carnival 2022
















































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Carnival 2022

Reviews:

Kia Carnival 2022, Owner'S Manual, Page: 396 / 687

Search results

Summary of Contents for Carnival 2022

Reviews: