manualshive.com logo in svg

Kia Carnival 2022, Owner'S Manual, Page: 389 / 687

Share
Download
Kia Carnival 2022 Owner'S Manual Download Page 389

57

5

5

Driving your vehicle

Forward Collision-Avoidance Assist (FCA) (Front

view camera only)

Forward Collision-Avoidance 
Assist may detect a vehicle, 
pedestrian in the next lane or 
outside the lane when driving on a 
curved road.
If this occurs, the function may 
unnecessarily warn the driver and 
control the brake or steering 
wheel. Always check the traffic 
conditions around the vehicle.

䳜 Driving on a slope

Forward Collision-Avoidance 
Assist may not detect other vehi

-

cles, pedestrians in front of you 
while driving uphill or downhill 
adversely affecting the perfor

-

mance of the sensors.
This may result in unnecessary 
warning, braking assist or steer

-

ing assist or no warning, braking 
assist or steering assist when 
necessary.
Also, vehicle speed may rapidly 
decrease when a vehicle or pedes

-

trian ahead is suddenly detected.
Always have your eyes on the 
road while driving uphill or down

-

hill and if necessary, steer your 
vehicle and depress the brake 
pedal to reduce your driving speed 
in order to maintain a safe dis

-

tance.

OCD059190

ODL3059040

OCD059192

Summary of Contents for Carnival 2022
















































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments