manualshive.com logo in svg

Kia Carnival 2022, Owner'S Manual, Page: 381 / 687

Share
Download
Kia Carnival 2022 Owner'S Manual Download Page 381

49

5

5

Driving your vehicle

Forward Collision-Avoidance Assist (FCA) (Front

view camera only)

䳜 If 'Off' is selected, the function will 

be turned off. The(

)warning 

light will illuminate on the cluster.

The driver can monitor Forward Col

-

lision-Avoidance Assist ON/OFF sta

-

tus from the Settings menu. If the 

(

)warning light remains ON 

when the function is ON, have the 
function be inspected by an autho

-

rized Kia dealer.

WARNING

When the engine is restarted, For

-

ward Collision-Avoidance Assist will 
always turn on. However, if 'Off' is 
selected after the engine is 
restarted, the driver should always 
be aware of the surroundings and 
drive safely.

CAUTION

If 'Warning Only' is selected, braking 
is not assisted.

NOTICE

Forward Collision-Avoidance Assist 
will turn off when ESC is turned off 
by pressing and holding the ESC OFF 

button. The(

)warning light will 

illuminate on the cluster.

Warning timing

With the ENGINE START/STOP but

-

ton in the ON position, select 'Driver 
Assistance → Warning Timing' from 
the Settings menu to change the 
initial warning activation time for 
Forward Collision-Avoidance Assist.

When the vehicle is first delivered, 
Warning Timing is set to 'Normal'. If 
you change the Warning Timing, the 
warning time of other Driver Assis

-

tance systems may change.

Warning volume

With the ENGINE START/STOP but

-

ton in the ON position, select 'Driver 

OMQ4AH050334

OMQ4AH050335

Summary of Contents for Carnival 2022
















































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments